- Auto Lighting System[2]
- Emergency Tools[1]
- Power Distribution Equipment[1]
- Energy Saving & Fluorescent[4]
- Ceiling Lights[4]
- Other Lights & Lighting Products[10]
- Speed Measuring Instruments[10]
- Alarm[10]
- Other Police & Military Supplies[1]
- Traffic Light[1]
- Traffic Signal[2]
- Other Telecommunications Products[4]
- Aviation Parts[10]
- Other Marine Supplies[1]
- Contact Person : Mr. Sun Micheal
- Company Name : Shanghai Nanhua Electronics Co., Ltd.
- Tel : 86-21-39126868
- Fax : 86-21-39126868--808
- Address : Shanghai,Shanghai,Building 9, No 1755, Wenbei Rd, Jiading District, Shanghai, China
- Country/Region : China
- Zip : 201802
Related Product Searches:navigation aids/warning light/warning lamp/side red light/side green light/top light factory,High Quality,obstruction light, warning light,LS710
Main fuctions and features:
• Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required
• Based on LED technology, low power consumption, and high effecience
• Die casting aluminum enclosure with powder-coat paint finishes, providing corrosion resistance and durability
• Extremely Reliable – Major Maintenance Cost Saving
• G3/4”pipe is available, ease of mount
• EMC Compliance, No RF Radiation
• Self-contained compartment, with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount
• Lamp housing – Polycarbonate, with good anti-impact strength, thermal stability, high transmittance
• Built-in photocell can switch ON/OFF the light at dawn and dusk (optional)
• Steady burning or flashing type (no need external controller).
Specification
Standard | Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810 | Vertical degree | ≥10 |
Light source | LED | Horizontal degree | 360 |
LED color | Aviation red | Flashing rate | Steady burning or flashing(flashing rate can be selected) |
Operating voltage | AC110V~AC240V(Option:DC48V) | LED life | ≥100,000h |
Power consumption | 6W | On/off level | 500Lux |
Intensity | ≥32.5cd |
|
|
| |||
Operating temperature | -30C ~ +70C | IP Protection | IP65 |
Relative humidity | 10% ~ 95% (no condensing) | Weight | 1.0kg |
Material | Base:Die casting aluminum, housing: PC |
Installation and operation
• Check whether the supply voltage does comply with the rated voltage of the lamp (Pay attention to the polarity in case of DC voltage).
• Insert the power cable through the bottom of lamp holder, and connect them to the terminals in the base respectively
• Select the flashing mode as required• Tighten the screws between lamp housing and base
• Screw the lamp on the G3/4” ( G1”) threaded pipe, which should be fixed on a smooth surface with enough mechanical strength. Or you can select our mounting bracket: PJ024, PJ028 and PJ030 (installing diagram), special bracket can be customized.
• Verify whether the power cables are well connected before power on.
Wiring diagram
Wiring diagram for DC power Wiring diagram for AC power
Installing diagram
LS710+PJ024 LS710+PJ028
LS710+PJ030
navigation aids/warning light/warning lamp/side red light/side green light/top light factory